| HOME | ABOUT | CONTACT |  

 

ELI 200
The ELI 200 interpretive electrocardiograph from Mortara Instruments is a flexible and portable instrument that provides simultaneous 12-lead acquisition. The printout, on 8.5" wide (215mm) paper, enables the presentation of 3, 4 or 6 channels of EKG in automatic mode and 3, 6 or 12 channels during rhythm recording.
Bonus : Free Internal modem.
Sale Price: $1099.00

The ELI 200s lead fail detection and signal quality check ensure optimal signal acquisition, reducing the need for EKG re-acquisition and thereby lowering operating expenses.

The LCD presents the user friendly interface which prompts the user for commands and displays the units status.

The full alphanumeric keyboard increases staff efficiency by making patient data entry fast and simple.

The optional internal modem provides the means to communicate with the E-Scribe/NT data management system or transmit to the Federal Aviation Administration.

The ELI 200s standard 40 EKG internal storage capacity can be expanded to 150 EKGs.

The Serial Comparison software included with the expanded memory option automatically compares every new record (interpretive text and waveforms) with the last six EKGs of the same patient and significant changes are highlighted.

Large 8.5 x 11 Report With Several Printout Formats
Simultaneous 12-Lead EKG Acquisition, Analysis and Interpretation

  • Specifications
    INSTRUMENT TYPE 12-lead Electrocardiograph
    INPUT CHANNELS Simultaneous acquisition of all leads
    STANDARD LEADS ACQUIRED I,II,III,aVR, aVL,aVF,V1,V2,V3,V4,V5,V6
    INPUT IMPEDANCE Meet or exceed the requirements of ANSI / AAMI EC11
    INPUT DYNAMIC RANGE Meet or exceed the requirements of ANSI / AAMI EC11
    ELECTRODE OFFSET TOLERANCE Meet or exceed the requirements of ANSI / AAMI EC11
    COMMON MODE REJECTION Meet or exceed the requirements of ANSI / AAMI EC11
    FREQUENCY RESPONSE Meet or exceed the requirements of ANSI / AAMI EC11
    PATIENT LEAKAGE CURRENT Meet or exceed the requirements of ANSI / AAMI ES-1
    CHASSIS LEAKAGE CURRENT Meet or exceed the requirements of ANSI / AAMI ES-1
    A/D CONVERSION 20 bits (1.17 microvolt LSB)
    DIGITAL SAMPLING RATE 10,000 s/sec/channel used for pacemaker spike detection 500 s/sec/channel used for recording and analysis
    DEVICE TYPE Type I, Class CF
    SPECIAL FUNCTIONS Baseline Filter; AC interference rejection; lead off and /or artifact detection
    RECORDING TECHNIQUE Computer-controlled thermal dot array; 200 dots/inch
    PAPER TYPE Thermal sensitive;full grid; 215mm x 75 m (8.5 x 11")
    THERMAL WRITER SPEEDS 5, 10, 25, 50 MM/S
    SENSITIVITY 5, 10, OR 20 MM/MV
    WEIGHTS 25 pounds (11.34 kg)
    DIMENSIONS 14" x 17.25" x 4.75" (35 x 43.1 x 11.8 cm)
    POWER REQUIREMENTS 100-240 V AC at 50 / 60 Hz or internal batteries (more than 100 ECGs per battery charge)